On the View menu, point to "Show 2D Zones", and then choose one of the following options:
No display
If you're displaying zones by name and/or by colour (see below for the "Fill" option) in a 2D plan view, then the "No display" option will undo the display settings without actually unzoning the geometry. In other words, the spaces and rooms will no longer display the zone names or colours but the zone data will still be exported to the TBD. If this option is set on one floor, then it will be set for all floors in the model. Turning off "No display" on one floor will deactivate it on all of the floors.
Name
When this option is turned on, zone names are displayed on 2D views. This option can be used alongside "Fill" to display the zone name and colour when the Set Zone button on the toolbar is selected.
Fill
Turn this option on to display the zone colour on the 2D view when the Set Zone button is selected and the relevant zone set is selected on the Zones sidebar. This option can be used in conjunction with "Name", to display both the zone name and colour on the 2D plan.
Font Size
This is the font size that is used when displaying zone names on 2D plan views. Select a point size from 8 to 72pt. The default font size is 10pt.