The Gain Tables have the following parameters:
Gain
The name of the parameter. This cannot be altered by the user. if you left click on the gain name it brings up the 'Profile' dialog box. For more details on this, please read the section on Editing Profiles.
Units
The units of measurement for the parameter. This cannot be altered by the user.
Value
The value of the parameter when the schedule value for a given hour is 1. To edit this value left click in the box, type in a new number and press <Return>
Factor
A multiplier that is applied to both the Value and Setback Value. To edit this value left click in the box, type in a new number and press <Return>
Setback Value
The value of the parameter when the schedule value for a given hour is 0. To edit this value, left-click in the box, type in a new number, and then press <Return>.
Schedule
The name of the schedule which determines when the value and setback values are used. If this is blank, the schedule is assumed to be always on and therefore the Setback Value is never used.
To apply a schedule to a gain, left click on the right hand side of the gain's schedule box, this will bring up a drop down list, select the schedule you want from it.
Alternatively, left click on the '+' by the schedules folder to list all the schedules. Place the pointer over the schedule's icon, hold down the left mouse button, move the pointer to the gain's row in the table and release the mouse button.
Schedules are described in further detail in the section: Schedules.